How to Spray a Stucco House

Weather and sun damage can make the finish on a stucco house look worn over time. Spruce it up by spray-painting the exterior. Just be sure the surface is clean and in good condition. Because of the ridges and pits in stucco, go slowly, in a sweeping motion, and plan on at least two coats of paint. Done right, your repainted stucco exterior will last for many years.

• 1

  Power-wash the stucco exterior and allow it to dry thoroughly.

• 2

  Mask off areas that could get hit with over-spray. Cover windows, doors and trim using brown paper or plastic panels and duct tape to secure in place.

• 3

  Spray on the tinted primer with the paint sprayer to give the exterior a good coat. Use the paint shield to block as much over-spray as possible. Allow to dry according to manufacturer's instructions. Clean out the paint sprayer per instructions as well.

• 4

  Spray the primered stucco with exterior paint, using the spray gun held 10 to 18 inches away from the surface. Use a slow, steady sweeping motion and spray at different angles to cover completely. Use the paint shield to block over-spray. Adjust the pressure and the pattern with the nozzle. Apply as many coats as needed.

• 5

  Thoroughly clean the paint sprayer equipment using soap and water for latex or solvent for oil-based paints, according to the manufacturer's instructions.