2001 Jeep Wrangler Back Seat Installation

If your Jeep Wrangler did not come with a back seat, you can purchase an aftermarket back seat and install it yourself. The bench seat is large enough for two people, and you can remove it if needed to haul cargo and larger items. The seat mounts in the flat area behind the front seats. Aftermarket seats come in a variety of colors to match your existing interior.

• 1

  Open the rear door of your Jeep Wrangler. Locate the stock mounting holes on the floor behind the two front seats. Remove the bolts with a ratchet and socket.

• 2

  Place the mounting bracket that came with the kit onto the stock mounting holes. Install the bolts you removed in Step 1 and tighten them using a ratchet and socket. Install the second mounting bracket in the same manner behind the other seat.

• 3

  Place the seat into the rear of your Jeep. Position the seat so that it slides into the mounting brackets installed in Step 2.

• 4

  Install the bolts through the mounting brackets to attach the seat to the brackets. Tighten the bolts using a ratchet and socket.

• 5

  Locate the seat belt mounting bolts in the rear floor of the Jeep. They are located in the center of the floor. Remove the bolt with a ratchet and socket. Place the seat belt bracket into position and reinstall the bolts. Tighten them using a ratchet and socket.

• 6

  Place the seat in the standard position.