How to Program a Keyless Remote for a 2007 Tundra

The Toyota Tundra is among the many cars by Toyota that features keyless remote capabilities. This technology first requires that a transmitter be installed by the manufacturer or added aftermarket, and then the transmitter is synced with up to four different handheld remotes. You can program the remotes yourself for your 2007 Tundra with nothing more than your car's ignition key and the remotes to be programmed.

• 1

  Close all of the doors on your car except the driver's door. Enter your car, leave the door open and unlock the door with the tab on the door.

• 2

  Insert and remove your key from the ignition twice. Close and open the door twice and insert and remove the key from the ignition again. Do this all within 40 seconds and maintain the same speed throughout the rest of the process.

• 3

  Close and open the driver's door two more times. Insert your key, close the door again, cycle the key "On" and "Off" and then remove the key again.

• 4

  Wait for the door locks to cycle within three seconds and then press and hold the main lock and unlock buttons on the remote for three seconds.

• 5

  Release the two buttons and press and hold just the Lock button. Hold this until the locks cycle again. Remove the ignition key or open the door to end the process.