Timex Autoset Talking Clock Instructions

An alarm clock is designed to put out a loud signal at a certain time. It is most often used to awaken people from their sleep. Although an alarm may seem like a simple function, it can be quite tricky to set. Timex Autoset Talking Clocks can be set by following a specific procedure.

• 1

  Find the "Time Set" button. It is located on the upper left hand side of the digital display screen. Press and hold this button until the digital display starts flashing.

• 2

  Find the "Forward" and "Reverse" buttons. They are located at the bottom of the front panel of the clock. There are three buttons all in a row. "Forward" is the button on the right and "Reverse" is the button on the left in this row. Use these buttons to set the time. Holding a button for a few seconds will make the numbers move faster. You will also find an "AM/PM" indicator on the display that needs to be set for the desired alarm time.

• 3

  Press the "Enter" button after setting the time. This is the button between forward and reverse. You may also wait 10 seconds for the unit to beep twice and the screen will return to normal mode

• 4

  Set the date if you are going to use the programmed alarm function. Find the "Date Set / 7-5-2" button. It is the 2nd button located to the upper left of the display screen. Press and hold the button until the display flashes and the year replaces the month/day at the bottom of the display. Press the "Reverse" or "Forward" buttons to set the year. Press "Enter."

• 5

  Press the forward and reverse buttons again to set the date. When you are finished, press the "Enter" button or wait 10 seconds for the screen to return to normal mode.

• 6

  Set the backlight. To select a setting, press the "Snooze/Dimmer Bar" button until the desired light is reached.