How to Replace Ignition Switch in a 2000 Dodge Caravan

If your 2000 Dodge Caravan refuses to start, one problem it could be is the ignition switch. The ignition switch on your Dodge Caravan is a switch that is engaged to send an electronic spark from your battery to your starter. Over time, dirt and debris can get lodged in the switch, which can cause the switch to eventually give out. Replacement of the switch is a fairly straightforward job once you gain access to it.

• 1

  Open the hood of your Caravan, and remove the negative battery terminal with a wrench.

• 2

  Remove the lower dashboard cover and the plate of the steering cover. Remove the screws holding them in place with a screwdriver. Also, remove the fuse box cover located between the driver's door and the steering wheel column.

• 3

  Trace the ignition wires that run from the steering wheel cover to the back of the fuse panel. Unscrew the screws holding these wires in place to the rear of the fuse panel.

• 4

  Loosen the old ignition switch by prying it gently out with a slotted screwdriver, and remove it. Slide the new ignition switch into place, feeding its wires through the steering wheel column.

• 5

  Reconnect the ends of the ignition switch wires to the rear of the fuse box. Replace the fuse box cover. Test the new ignition switch by starting your Dodge Caravan.

• 6

  Replace the steering cover plate and dashboard cover. Also, replace the negative battery terminal.