How to Install a Whirlpool Duet AP3672824

Whirlpool makes the Duet washer model #AP3672824 for residential use. This model has a smart dispenser system to add detergent, bleach and fabric softeners to the tub at the appropriate times. The machine also features an automatic water level indicator that adds additional water to a wash load for optimal cleaning. Installing and leveling the Whirlpool Duet correctly enables the appliance to perform at its best.

• 1

  Place the washer near the final installation area. Remove the four packing bolts and spacers on the back of the washer with an adjustable wrench. Pull the power cord off the bolts. Press the four bolt spacers back into each hole.

• 2

  Screw the water inlet hose with the blue fitting onto the cold-water faucet in a clockwise direction until it is tight. Tighten the hose an additional two-thirds turn with adjustable pliers. Repeat this process to attach the hot-water inlet hose with the red fitting. Turn both the hot- and cold-water valves on in a counterclockwise direction.

• 3

  Place the curved end of the drain hose in the standpipe. Wrap the metal beaded strap tightly around both inlet hoses and the drain hose.

• 4

  Place a level on top of the washer front from side to side. Unscrew the feet with an adjustable wrench on the adjustment nut of each foot until you achieve a level surface. Repeat this process to level the washer from front to back. Push the washer close to the wall and recheck for level.

• 5

  Plug the power cord into the electrical outlet.