Setting Up Television
- 1
Plug in the television.
- 2
Put new batteries in the remote control.
- 3
Turn on the TV. The auto setup menu appears.
- 4
Select "TV" (antenna) or "CABLE" mode.
- 5
Press "VOL >" to start auto programming. Wait until the auto programming has stopped before proceeding.
- 6
Press "VOL >" to display the adjustment menu.
- 7
Press "< VOL" or "VOL >" to adjust discoloration in the picture and adjust picture tilt.
Remote Control Operations
- 1
Press "POWER" to turn the TV on and off.
- 2
Press "TV," "VCR," "DBS/CBL" or "DVD" to select a remote operation.
- 3
Press the "ACTION" button, located in the middle of the large circle, to access the TV menu.
- 4
Press the "MUTE" button to mute the sound.
- 5
Press "TV/VIDEO" to select TV or video mode.
- 6
Press the "MENU" button to access DVD and DBS menus.
- 7
Press the numeric keypad to select any channel.
- 8
Press the "R-TUNE" button to switch to previously viewed channel or video mode.
- 9
Press the "SAP" button to select audio modes (Stereo, SAP or Mono).
- 10
Press "<VOL" or "VOL>" to adjust TV sound and to navigate menus.
- 11
Press "CH up" and "CH down" to select next or previous channel and navigate menus.
- 12
Press the "RECALL" button to display time, channel, sleep timer and other options.
- 13
Press the "GUIDE" button for DBS functions.
- 14
Press the "EXIT" button for DBS functions.
- 15
Press the "PROG" button to enter the minor number in a compound channel number (DBS mode only).
- 16
Use the "REW," "PLAY," "FF," "PAUSE," "STOP," "REC" to operate components.
No comments:
Post a Comment